Our Contacts
For consultation and orders:
WhatsApp:
Working hours:
Mon-Fri
08:30 - 17:30
The capacity of one module is 5.2 kWh.
Yes, you can connect up to 5 modules, achieving a total capacity of up to 26 kWh. Additionally, up to 6 devices can be connected, allowing for a total capacity of up to 156 kWh.
The device uses a BYD lithium iron phosphate battery.
The designed battery lifespan is 20 years, with over 6000 life cycles.
After approximately 6000 charge-discharge cycles, the battery may begin to lose capacity and efficiency. This means it will hold less charge and provide shorter operating times compared to its new state. Nevertheless, the battery will still function, but with reduced performance. To maintain optimal system performance, it is recommended to replace the battery module after its lifecycle is exhausted.
The standard warranty on the device is 3 years. It can be extended by an additional 2 years.
Inverter: dimensions 600×430×150 mm, weight approx. 16.4 kg.
Base: dimensions 600×430×152 mm, weight approx. 9.3 kg.
Battery module: dimensions 600×430×204 mm, weight approx. 46.9 kg.
The device operates in a temperature range from -10℃ to +60℃.
The device supports charging from AC power (AC 110V / AC 220V) and from photovoltaic panels (solar panels) via an MPPT controller.
The nominal AC output power is 5000 W.
The maximum input power for AC charging ranges from 800 W to 4500 W. For photovoltaic (MPPT) charging, the range is from 800 W to 5600 W.
The device supports a DB15 parallel port, USB, and RS485 for communication and monitoring.
Yes, remote monitoring and control are supported through the available communication interfaces using a mobile phone.
The device is versatile and suitable for both home use and commercial purposes, including small businesses and infrastructure facilities.
Installation should be carried out by a qualified technician in accordance with technical requirements. It is recommended to provide protection against extreme temperatures and to adhere to the specified operating conditions.
The system is equipped with an inverter with a nominal AC output voltage of AC 110V / AC 220V and a nominal power of 5000 W.
The device is equipped with a protective board with a conductivity resistance of ≤10 mΩ and supports various safety protocols for secure operation.
DC48V output: 48V at 25A current, up to a maximum of 50A.
The runtime depends on the system's total capacity and current load. One module with a capacity of 5.2 kWh can provide power for approximately 5 hours under a 1 kW load.
Our Contacts
For consultation and orders:
WhatsApp:
Working hours:
Mon-Fri
08:30 - 17:30